how to calculate req'd size of woodstove

Solar energy, wind turbines whatever it is then here is your place to talk about it.
Furoner
margo - newbie
margo - newbie
Posts: 1
Joined: Wed Apr 04, 2012 7:57 pm
latitude: 40N
longitude: 0.01E
Location: Spain - between Barcelona and Valencia, rural mountainous area

how to calculate req'd size of woodstove

Post: #257861 Furoner
Wed Apr 04, 2012 8:16 pm

Has anyone suggestions where I can find how to calculate/estimate the required output of a woodstove given certain parameters e.g climate, house construction, volume, area of external walls, areas of d/glazed windows, other heat sources.....etc. If you have been through this exercise and will share experience then I'll let you have more details. Thanks in anticipation.

User avatar
KathyLauren
Living the good life
Living the good life
Posts: 396
Joined: Wed Aug 05, 2009 11:57 pm
latitude: 44.5
longitude: -66
Location: East Coast of Canada

Re: how to calculate req'd size of woodstove

Post: #257873 KathyLauren
Wed Apr 04, 2012 10:03 pm

To be honest, calculating seems like a lot of work, given the number of variables. Don't forget that placement of the stove and methods of circulating the heat factor into it too.

I would just visit around friends or neighbours that have wood stoves to see what works in houses like yours.

User avatar
demi
A selfsufficientish Regular
A selfsufficientish Regular
Posts: 1124
Joined: Wed May 11, 2011 6:03 pm
latitude: 41° 50' N
longitude: 22° 00' E
Location: Prilep, Macedonia

Re: how to calculate req'd size of woodstove

Post: #257881 demi
Thu Apr 05, 2012 7:06 am

we calculate ours by how many square meters of space you need to heat, the more wood the stove can burn at one time the more space it will heat.
but yes there are many other variables.

we have a stove in the kitchen/living-room and another in the bedroom ( and others in the other bedrooms when there finished ) 1 is not enough for our entire house, but it certainly keeps the room its in nice and tostie :iconbiggrin:
Last edited by demi on Thu Apr 05, 2012 1:48 pm, edited 1 time in total.
Tim Minchin - The Good Book
http://www.youtube.com/watch?v=kr1I3mBojc0

'If you just close your eyes and block your ears, to the acumulated knowlage of the last 2000 years,
then morally guess what your off the hook, and thank Christ you only have to read one book'

User avatar
bonniethomas06
A selfsufficientish Regular
A selfsufficientish Regular
Posts: 1245
Joined: Wed Oct 17, 2007 10:24 am
Location: Wiltshire, UK

Re: how to calculate req'd size of woodstove

Post: #257887 bonniethomas06
Thu Apr 05, 2012 8:35 am

Hi there and welcome to ish :wave:

We have a 7.5kw stove which heats our titchy living room (3.5m x 4m) to sweltering point. Admittedly we are not good at keeping it on a low burn. So I recon you could get away with a 7.5kw in a 5x5m room with no problems.
"A pretty face is fine, but what a farmer needs is a woman who can carry a pig under each arm"

My blog...

http://www.theparttimesmallholder.blogspot.com

niknik
Living the good life
Living the good life
Posts: 434
Joined: Fri Dec 31, 2010 3:50 pm
Location: Spain

Re: how to calculate req'd size of woodstove

Post: #257905 niknik
Thu Apr 05, 2012 10:53 am

better too big than too small.!

Mine threw out far too much heat, for the room it was in........ so we took the wall out to the adjoining room :iconbiggrin:

by having it on full blast, and leaving various doors open, I can warm quite a bit of the house..... just cant sit near it though!

after a while, ( trial and error), you´ll work out what and how much to burn at any time to regulate the output

User avatar
Zech
Site Admin
Site Admin
Posts: 857
Joined: Wed Dec 15, 2010 3:05 pm
latitude: 52.36
longitude: -3.84
Location: Mid Wales
Contact:

Re: how to calculate req'd size of woodstove

Post: #257922 Zech
Thu Apr 05, 2012 1:39 pm

Yes we have been through this recently, and there are lots of online sites for the kind of calculations you mention. Unfortunately, when I looked through my bookmarks to find them, the only one I could find was this: http://www.heatweb.com/ which I seem to remember has an annoying limitation of hot water flow rates. You don't mention whether you want your stove to heat the entire house (our is running the central heating) or just one room.

What we actually did in the end was notice an old stove on the pavement outside the local hotel, had a look at the space it had been heating, reckon it was about the same as our house, and negotiate removal of said stove.

I'm not sure about the 'better too big' advice. Wood burns more efficiently when the fire's really roaring, so a small stove going flat out, with back up for the coldest few weeks of the year, is probably the most efficient way of doing it. It also means you can sit by the fire comfortably :iconbiggrin:

One detail we paid too little attention to was the effect of fuel type - our stove is multifuel but we only burn wood in it, which reduces the heat output to roughly half, we're told. Even so, we manage to get enough heat out of it.

I'd recommend the green building forum - http://www.greenbuildingforum.co.uk/forum114/ - for technical advice, though it can get very technical :scratch:
---
Rachel

Take nobody's word for it, especially not mine! If I offer you an ID of something based on a photo, please treat it as a guess, and a starting point for further investigations.

My blog: http://growingthingsandmakingthings.blogspot.com/


Return to “Alternative Energy”

Who is online

Users browsing this forum: No registered users and 1 guest