I've never had the paddle stick inside the loaf when it has come out of the tin. Tin and paddle always come off the loaf together.southeast-isher wrote:now after letting the loaf cool i rotate the paddle with my fingers 360 degrees which breaks the bread seal baked inbetween the paddle and the loaf. Might work for you if you're having the same problem.
Breadmaker Question. Need Some advice.
- Millymollymandy
- A selfsufficientish Regular
- Posts: 17637
- Joined: Tue May 10, 2005 6:09 am
- Location: Brittany, France
Re: Breadmaker Question. Need Some advice.
http://chateaumoorhen.blogspot.com/boboff wrote:Oh and just for MMM, (thanks)
- Keaniebean
- A selfsufficientish Regular
- Posts: 605
- Joined: Fri May 16, 2008 8:14 am
- Location: London
Re: Breadmaker Question. Need Some advice.
I have been following the recipies in the book to the letter. we have never had a problem with them rising. It is more the sides and the bottom that have been sticking and althogh the paddle gets stuck in the bottom, which I dont mind it hs been the loaf splitting into several unusable pieces, which then means the rest is not really suitable for slicing.
(Well I say unusable, what normally happens is that we stand there with tub of butter and toastie hot pieces of bread and end up eating them )
I've just put a malted loaf in as per the recipies in the mannual, i have changed the crust setting to pale and i will leave it in the tin for a while to see if this helps. I'll let you know in about 3 1/2 hours
(Well I say unusable, what normally happens is that we stand there with tub of butter and toastie hot pieces of bread and end up eating them )
I've just put a malted loaf in as per the recipies in the mannual, i have changed the crust setting to pale and i will leave it in the tin for a while to see if this helps. I'll let you know in about 3 1/2 hours
Sarah.x
Come on over and see the fun at Troll Manor http://trollfamily.blogspot.com/ Now blogging once more :) after a little shove from the one and only MMM.
Come on over and see the fun at Troll Manor http://trollfamily.blogspot.com/ Now blogging once more :) after a little shove from the one and only MMM.
- ADG
- Living the good life
- Posts: 205
- Joined: Wed Sep 23, 2009 1:13 pm
- Location: almost KingsLynn Norfolk/Lincs
- Contact:
Re: Breadmaker Question. Need Some advice.
exactly what we do and we never have a problemnumber6 wrote:Try greasing the spindle on which the paddles mount with a little olive oil.The paddles should then slide off remaining in the loaf then you remove them as you slice your loaf.It works sometimes.I also grease the pan before adding ingredients using a piece of kitchen rollKeaniebean wrote:My husband and I were given a breadmaker for Christmas which we really wanted. The first few loaves came out perfectly but since then almost every loaf has stuck to the bottom of the pan and we have been left with only half a loaf.
This is a real pain and a real waste, so something which was meant to help us save money is, in reality ending up costing us more.
Does anyone know what we can do to stop the bread from sticking to the pan?
Any hints or tips greatly appreciated.
Re: Breadmaker Question. Need Some advice.
If you get unpredictable results, it could well be that your measurements are out. However carefully you try and measure out 100ml of water - you'll probably vary by as much as 10ml or more depending on the measuring jug. The answer is to weigh it instead. As an experiment, measure out 100ml and then weigh it. Repeat & repeat and watch just how much it varies. With something as critical as bread, you need to be accurate to produce consistent loaves.
Andy
-
- A selfsufficientish Regular
- Posts: 1439
- Joined: Thu Mar 13, 2008 3:49 pm
- Location: Hailsham East Sussex
Re: Breadmaker Question. Need Some advice.
Hi,
I too have a Panasonic, managed to kill 4 of the other types, probably through over use, however we love this one. What I have discovered is...never wash the bread pan or paddle,stand warm water in and all "stuff" will come out easily after a few mins. Secondly, always use either butter or oil, when I have tried with sunflower spread or olive spread it has stuck.Lastly if you leave the loaf in the pan for 10 mins before trying to turn it out it will release itself quite happily.
HTH
Becks
I too have a Panasonic, managed to kill 4 of the other types, probably through over use, however we love this one. What I have discovered is...never wash the bread pan or paddle,stand warm water in and all "stuff" will come out easily after a few mins. Secondly, always use either butter or oil, when I have tried with sunflower spread or olive spread it has stuck.Lastly if you leave the loaf in the pan for 10 mins before trying to turn it out it will release itself quite happily.
HTH
Becks
"no-one can make you feel inferior without your permission"
Re: Breadmaker Question. Need Some advice.
I have to say I must be a bit of a wierdo.A&A wrote:If you get unpredictable results, it could well be that your measurements are out. However carefully you try and measure out 100ml of water - you'll probably vary by as much as 10ml or more depending on the measuring jug. The answer is to weigh it instead. As an experiment, measure out 100ml and then weigh it. Repeat & repeat and watch just how much it varies. With something as critical as bread, you need to be accurate to produce consistent loaves.
I never bother too much about weights or even recipes, never have.
With my bread making I put in as much water as it needs, never measured. The only thing I ever weigh is the flour and only then because if I use too much it won't fit the loaf tins. Other than that I chuck in whatever takes my fancy, sunflower seeds, rolled oats (porridge), sometimes dried milk, sometimes an egg or two when I have a glut, and without boasting the only time I had a failure was when I totally forgot to put any yeast in.
That may be due in part to not using a breadmaking machine, mine gets baked when it's risen enough rather than a set time that the machine has been programmed.
Tony
Disclaimer: I almost certainly haven't a clue what I'm talking about.
Disclaimer: I almost certainly haven't a clue what I'm talking about.
- Keaniebean
- A selfsufficientish Regular
- Posts: 605
- Joined: Fri May 16, 2008 8:14 am
- Location: London
Re: Breadmaker Question. Need Some advice.
We have always used the measuring cup and spoons which came with the breadmaker so i don't think it's to do with the measurements.
Well I chickened out of letting the malt loaf cook in the pan, so I let it knead in the breadmaker then turned it out and cooked it in the oven. I've got another on the go in the breadmaker at the moment, so I'll see how that one comes out, but if it's rubbish then there is a lovely round malt loaf already made.
Thanks again for all the advice. I'll give every thing a go and see what works.
Well I chickened out of letting the malt loaf cook in the pan, so I let it knead in the breadmaker then turned it out and cooked it in the oven. I've got another on the go in the breadmaker at the moment, so I'll see how that one comes out, but if it's rubbish then there is a lovely round malt loaf already made.
Thanks again for all the advice. I'll give every thing a go and see what works.
Sarah.x
Come on over and see the fun at Troll Manor http://trollfamily.blogspot.com/ Now blogging once more :) after a little shove from the one and only MMM.
Come on over and see the fun at Troll Manor http://trollfamily.blogspot.com/ Now blogging once more :) after a little shove from the one and only MMM.
- Keaniebean
- A selfsufficientish Regular
- Posts: 605
- Joined: Fri May 16, 2008 8:14 am
- Location: London
Re: Breadmaker Question. Need Some advice.
The results look good so cheers all.
Sarah.x
Come on over and see the fun at Troll Manor http://trollfamily.blogspot.com/ Now blogging once more :) after a little shove from the one and only MMM.
Come on over and see the fun at Troll Manor http://trollfamily.blogspot.com/ Now blogging once more :) after a little shove from the one and only MMM.
- wulf
- A selfsufficientish Regular
- Posts: 1184
- Joined: Sat Mar 19, 2005 8:41 am
- Location: Oxford, UK
- Contact:
Re: Breadmaker Question. Need Some advice.
I haven't used my bread machine much recently but made a loaf yesterday as I had guests coming round and not enough time to do my normal hand-made process. I must have written my recipe down wrong as it didn't rise much (although it was quite tasty)! Back to tweaking - when I first got my machine, I took some basic recipes and then made small adjustments until I got it to my satisfaction and it seems I need to do that again!
On the other hand, the reason I don't use it much now is because (when I've got time to let the dough have enough resting) I've found a method that requires very little effort and certainly no heavy kneading (you'll find a link to my video demo in one of the other bread threads on here).
Wulf
On the other hand, the reason I don't use it much now is because (when I've got time to let the dough have enough resting) I've found a method that requires very little effort and certainly no heavy kneading (you'll find a link to my video demo in one of the other bread threads on here).
Wulf
- Millymollymandy
- A selfsufficientish Regular
- Posts: 17637
- Joined: Tue May 10, 2005 6:09 am
- Location: Brittany, France
Re: Breadmaker Question. Need Some advice.
They look good Keanie but that's a huge hole in the bottom of your loaf! Mind you I suppose that is an improvement on half a loaf coming out of the tin.
http://chateaumoorhen.blogspot.com/boboff wrote:Oh and just for MMM, (thanks)
- Keaniebean
- A selfsufficientish Regular
- Posts: 605
- Joined: Fri May 16, 2008 8:14 am
- Location: London
Re: Breadmaker Question. Need Some advice.
That's just from the paddle MMM, believe me, that is a huge improvement on the amount we have been loosing, so I don't mind that at all.
Sarah.x
Come on over and see the fun at Troll Manor http://trollfamily.blogspot.com/ Now blogging once more :) after a little shove from the one and only MMM.
Come on over and see the fun at Troll Manor http://trollfamily.blogspot.com/ Now blogging once more :) after a little shove from the one and only MMM.
Re: Breadmaker Question. Need Some advice.
There you go, hot out of the oven .... 3 one pound loaves for less energy than a breadmaking machine single loaf.
Got to be greener even though they're brown
Plus I'm now baking a chicken pie for dinner with the residual oven heat.
Got to be greener even though they're brown
Plus I'm now baking a chicken pie for dinner with the residual oven heat.
Last edited by Odsox on Tue Mar 23, 2010 7:51 pm, edited 1 time in total.
Tony
Disclaimer: I almost certainly haven't a clue what I'm talking about.
Disclaimer: I almost certainly haven't a clue what I'm talking about.
- Millymollymandy
- A selfsufficientish Regular
- Posts: 17637
- Joined: Tue May 10, 2005 6:09 am
- Location: Brittany, France
Re: Breadmaker Question. Need Some advice.
Blimey, why doesn't my hubby do things like that?
Oh I forgot, he's just installed me a groovy archway/pergola thingy and planted a climbing rose and clemmy beside it! I'll do the bread and dinner then.
Oh I forgot, he's just installed me a groovy archway/pergola thingy and planted a climbing rose and clemmy beside it! I'll do the bread and dinner then.
http://chateaumoorhen.blogspot.com/boboff wrote:Oh and just for MMM, (thanks)
Re: Breadmaker Question. Need Some advice.
Another vote for panasonic breadmaker, it is the best I have ever had and wouldn't swap it for the world...no failiures yet.
Sing like nobody's listening, live like there's no tomorrow, dance like nobody's watching and love like you've never been hurt.
Re: Breadmaker Question. Need Some advice.
Just out of interest, regarding the 'green' thing - my electric oven uses 6 times more kw/h than my bread machine does to bake a loaf. Therefore, I have to bake 6 loaves to break even on energy use. However, it's not as simple as that since there's no way I can fit 6 loaves in the oven...
Andy