Tractor Parts Needed Please Help

Cycling, trains, walking. This is the place to talk about how good or bad cycle routes are, mention great train journeys, talk about car sharing schemes or husky travel. Anything in fact that is about transport that is a little alternative.
Post Reply
jenko
Tom Good
Tom Good
Posts: 99
Joined: Sun May 04, 2008 12:21 pm
Location: Derbyshire

Tractor Parts Needed Please Help

Post: # 138319Post jenko »

Having bought a tractor early on last year, i now have kicked my arse into action, and i intend doing it up, however i need certain parts, can anyone help????

It is A Fordson E1A Super Major,

The parts i require are: Bonnet, Cowl, Fenders (rear mudgaurds), manifold.

BUT, Im in desperate need of a fordson E1A rear end, as i need a hydraulic lid, and pump, and lifting gear.

Please PM me if you can help.

Jenko

guyd
margo - newbie
margo - newbie
Posts: 11
Joined: Tue Apr 08, 2008 9:07 pm

Re: Tractor Parts Needed Please Help

Post: # 141098Post guyd »

So you bought an engine? :scratch:

Theres some 16 inch wheels on fleabay at the moment.

jenko
Tom Good
Tom Good
Posts: 99
Joined: Sun May 04, 2008 12:21 pm
Location: Derbyshire

Re: Tractor Parts Needed Please Help

Post: # 142255Post jenko »

sorry didnt write back, erm havnt been able to get on for a while.

no, i bort a complete tractor, its just that when it was made, it didnt have hydraulic three point linkage built on to it, that is why i am looking for a doner tractor, so i can have lifting gear on the back.
Fordson 9.jpg
Fordson 9.jpg (28.77 KiB) Viewed 2307 times
Fordson 5.jpg
Fordson 5.jpg (30.65 KiB) Viewed 2307 times
Im working on her at the moment, and have just bort some wheels and have fitted them on sunday.

jenko
Tom Good
Tom Good
Posts: 99
Joined: Sun May 04, 2008 12:21 pm
Location: Derbyshire

Re: Tractor Parts Needed Please Help

Post: # 142257Post jenko »

the above pics were from the previous owner, she now has currently spent the last six months languishing in my garage.
DSC00117.JPG
DSC00117.JPG (158.05 KiB) Viewed 2241 times
this is a pic of my new wheels fitted:
DSC00189.JPG
DSC00189.JPG (143.95 KiB) Viewed 2241 times

guyd
margo - newbie
margo - newbie
Posts: 11
Joined: Tue Apr 08, 2008 9:07 pm

Re: Tractor Parts Needed Please Help

Post: # 142443Post guyd »

weird - a tractor without the means to use 99% of its use....

keep diggin' on fleabay and similar local ads?

jenko
Tom Good
Tom Good
Posts: 99
Joined: Sun May 04, 2008 12:21 pm
Location: Derbyshire

Re: Tractor Parts Needed Please Help

Post: # 143264Post jenko »

by all acounts it had shunting gear on the back, bit like a snow plough, so it did have a use when it was made but, sadly it was removed, and now it will be converted to proper tractor use.

its in no rush, so ill just keep looking

jenko

Post Reply