Page 2 of 2
Posted: Fri Apr 18, 2008 8:16 am
by theabsinthefairy
Ohhh- I'm inspired now - but means even less will go in the recycling boxes and more into boxes in the barn for me to get round to doing things with.
Nail tin to gate or post, pierce other side, and drop in a ball of string - very handy dispenser.
Posted: Fri Apr 18, 2008 8:46 am
by Sky
A storm lantern
Posted: Sat Apr 19, 2008 8:54 am
by mrsflibble
for bean-type cans:
fill with water and freeze, when fully hard (about 24 hours) remove from freezer and set to with a sharp punch of somekind and a mahher. I use a large headed masonry nail.
punch out a pattern of dots.
leave somewhere to thaw and drain, stick a candle in it and light. mmmm pretty.
for beer cans:
do the above, but cut out a hole at the bottom like the post just before this one has.
Posted: Fri May 23, 2008 4:37 pm
by jondy
Amazing, but true. A Company that makes solar space heaters from recycled aluminium cans.
www.cansolair.com/ Lots more stuff related to cans and solar heating try
www.reuk.co.uk for example.
Also easy DIY solar water heating ideas for (almost) free hot water when the sun shines.
John
Re: 101 uses for tin cans
Posted: Sat Jun 21, 2008 12:06 am
by grumpy jock
If you can still find tuna cans with a lip at both ends so you can remove them with can opener... they can be used as egg poachers or for neat round fried egg.
Grumpy j
Re: 101 uses for tin cans
Posted: Mon Jul 07, 2008 7:06 pm
by LBR
Good for using kerosene, paint thinner, etc. for brush and tool cleaning.
Re: 101 uses for tin cans
Posted: Mon Jul 07, 2008 11:12 pm
by urbanwookie
I had an elderly relative who used to make art out of sliced up tin cans. This varied from simple punched tin folk art to ornate decorative "masks" using quite intricate patterns cut out and riveted together. He had friends and family collect those large instant coffee cans for raw materials...
You might find that you can solder bits of tin can together - if you use a large enough soldering bit - with lead-free solder.
or
You could make some "spoon" type fishing lures - although they might rust...
or
Remove top and bottom lids of the can , flatten out the tin, cut out a "windmill" propeller-type shape - you might be able to do this with kitchen scissors although "tin snips" would be eminently better - twist the "sails" in order to better catch the wind, paint brightly and nail up to a suitable spot around the garden. Scare the birds and make a nice noise too!
rb