Our washing machine ceased to do the one thing expected of it. Wash. However the parts are all intact, so I'm thinking about stripping it down to do something useful with the motor, water pump etc. (The drum is already bagsied as an incinerator or planter.)
Has anyone come across any so-simple-an-8-year-old-could-do-it plans or instructions for how to construct a basic wind turbine using these parts? Blades are not really a problem, it's the electricity/generating/connecting things up bit that I am less sure of. Thankee.
Using washing machine parts for a DIY mini wind turbine
- EcoTreedweller
- margo - newbie
- Posts: 17
- Joined: Fri May 03, 2013 9:53 pm
- latitude: 52.6500
- longitude: 1.2800
- Location: Norfolk
Using washing machine parts for a DIY mini wind turbine
Facebook me: Eco Treedweller
Tweet me: @EcoTreedweller
Tweet me: @EcoTreedweller
-
- Jerry - Bit higher than newbie
- Posts: 27
- Joined: Sun Jun 28, 2009 11:21 am
- Location: Snowdonia. Wales. United Kingdom
Re: Using washing machine parts for a DIY mini wind turbine
Not really a practical starting point for all sorts of reasons, you'll need some sort of permanent magnet generator (PMG) which COULD be made from a washing machine motor but you'd need to rewind the stator and buy or construct a permanent magnet rotor. (not a "so simple an eight year old could do it" project.)
You might try http://www.navitron.org.uk/forum/index. ... d,8.0.html for more advice.
You might try http://www.navitron.org.uk/forum/index. ... d,8.0.html for more advice.
Re: Using washing machine parts for a DIY mini wind turbine
Whatever you do with the rest of it,you'll find the glass window makes a brilliant salad bowl.
- contadina
- A selfsufficientish Regular
- Posts: 807
- Joined: Thu Mar 29, 2007 12:11 pm
- Location: Puglia, Italy
Re: Using washing machine parts for a DIY mini wind turbine
The also make looking out of the round window possible
- doofaloofa
- A selfsufficientish Regular
- Posts: 1351
- Joined: Sun Feb 05, 2012 9:50 am
- Location: Wesht Cark, RoI
Re: Using washing machine parts for a DIY mini wind turbine
ETD you are my hero
My friend made a wood lathe from a wasing machine motor
My friend made a wood lathe from a wasing machine motor
ina wrote: die dümmsten Bauern haben die dicksten Kartoffeln
-
- Living the good life
- Posts: 493
- Joined: Mon Jul 16, 2012 5:13 pm
- Location: south staffordshire
Re: Using washing machine parts for a DIY mini wind turbine
Doofer I did the same thing ages ago , a simple lathe out of a washing machine motor. I made a couple of dozen bowls in beech , ash and sycamore all around 9" across and it worked a treat until I became over ambisious and tried to turn a bowl almost twice that size and ended up bending the shaft on the motor
I like etd's thinking mind and if anyboby gets this sort of thing done I'd like to see the details.
Pete
I like etd's thinking mind and if anyboby gets this sort of thing done I'd like to see the details.
Pete
- EcoTreedweller
- margo - newbie
- Posts: 17
- Joined: Fri May 03, 2013 9:53 pm
- latitude: 52.6500
- longitude: 1.2800
- Location: Norfolk
Re: Using washing machine parts for a DIY mini wind turbine
@solarwind - Thanks for the link, looks like a lot of info there, will see if I can get my head around it. :)
@oldjerry - Haha, the only two things I've found to do with the door is a) salad bowl and b) (@contadina) a round window. Lol.
@doofaloofa - Bless ya! (liking your avatar btw - the mozzies I met today, I could've done with that kit, lol!).
The whole project is being made up as I go along, so of course it's subject to change (i.e. giving up and doing something else) but will keep y'all posted on how it goes, if it does go, that is! Cheers.
@oldjerry - Haha, the only two things I've found to do with the door is a) salad bowl and b) (@contadina) a round window. Lol.
@doofaloofa - Bless ya! (liking your avatar btw - the mozzies I met today, I could've done with that kit, lol!).
The whole project is being made up as I go along, so of course it's subject to change (i.e. giving up and doing something else) but will keep y'all posted on how it goes, if it does go, that is! Cheers.
Facebook me: Eco Treedweller
Tweet me: @EcoTreedweller
Tweet me: @EcoTreedweller